This site uses cookies. By continuing, your consent is assumed. Learn more

99.4fm shares

Reverse osmosis hookup


You found a great model online that suits your needs and you purchased it a couple of days ago. This morning the system arrived in a big heavy box.

There is a tank, different filters, a membrane, an extra faucet, tubing of different colors, and a couple of smaller connectors and valves. Now all you can think about is that hopefully you have the expertise to set everything up correctly — after all, you are not a plumber! In this article we will provide you with all the resources you need for a trouble-free installation process. Also, every system comes with detailed setup instructions.

Individual steps may vary from product to product and depend on your specific plumbing setup. Therefore, Reverse osmosis hookup following installation details are given as Reverse osmosis hookup general approach. So, look up the specifications of your favorite system and perform some measurements.

You also need to make sure that there actually is a cold water line you can draw the feed water from which, of course, is nearly always the case.

Instructions on how to connect...

Once the system has been delivered, unbox it and double check that all components fit in their desired location. This way you already know beforehand if you need to make some adjustments to the drain or other pipes before the installation itself can start.

Identify and assemble all necessary tools and components. Having everything you need lined up Reverse osmosis hookup you start the installation can save you from a lot of frustration. The following list makes no claim Reverse osmosis hookup completeness:. We begin the installation with setting up the RO faucet that will soon provide great tasting, filtered drinking water. First of all, you have to decide where you want to place the faucet, which is an easy decision, if your sink already has an extra hole for the mounting.

Depending on the type of material, you may require a special Reverse osmosis hookup of drill bit here. Now carefully drill the hole and go extra slow when you are about to penetrate any metal a drop of oil in the hole can work wonders.

When you are done, remove any remaining metal chips that Reverse osmosis hookup damage the surface. Place the faucet stem inside the hole and secure it with a nut from the bottom. Then attach the quick connect fitting to the bottom of the faucet and tighten it with a hand wrench. The next step is to install the drain saddle or drain line adapter to the drain line.

Put the drain saddle in place and fix it with bolts. Be careful to not over tighten anything. In step three, we install the inlet feed valve, which connects the RO system to the cold water line of the existing sink. First, turn off both the cold and hot water supply. If the valves are Reverse osmosis hookup, you have to shut off the whole water supply to your home. Next release the pressure in the water lines by opening the faucet.

Then remove the tubing from the cold water valve and install the new feed valve. Make sure to turn the feed valve off. Attach the cold water tubing back to the new valve and turn the cold and hot water supply back on.

You should place the storage tank within 10 feet of the drinking water faucet to not lose any significant pressure. With many systems, the storage tank can also be placed on its side without affecting filtration performance. This comes in handy, if you lack sufficient space under your kitchen sink. The connector should thread on easily and only needs to be hand tight.

Keep in mind that trimmed connections will maximize water flow rate. On the other hand, leaving some extra tubing will come in handy, if the system ever needs to be moved somewhere else. Apart from this, there may be water residues in the tubes if the system was tested by the manufacturer, so keep a towel at hand to wipe it up. As with the storage tank, many RO modules can be mounted both vertically and horizontally.

When positioning, take into consideration that every once in a while you need to access the module for filter replacements and Reverse osmosis hookup maintenance tasks. Once all the connections are made, place the different filters and the RO membrane into their housings according to the instructions provided. Usually, the first filter will be the sediment filter, followed by carbons filter sand lastly the membrane. To put the membrane in place you have to remove the housing cap and carefully push the cylinder into the socket until completely in.

Then put the housing Reverse osmosis hookup back on. It is recommended to flush a new RO system times prior to use. A large proportion of customers choose to install their RO system themselves. However, an Reverse osmosis hookup larger part prefers to turn to an expert, because these people are worried about not having the right tools and knowledge to complete the task.

If you, too, are in doubt about your manual skills, we recommend you to call a local plumber to do the installation for you. How much the installation of an RO system costs, depends first and foremost on what kind of system you want to have installed.

Popular sites you can use are:. Furthermore, it is likely that you can save a lot of cash, if you talk to more than one plumber and let them know that you already have purchased a system, but need help with the installation. Ask for their expertise, references, and a cost estimate. Save my name, email, and website in this browser for the next time I comment.

On this page you will learn: Installation Diagram Step by Step Individual steps may vary from product to product and depend on your specific plumbing setup. Tools Identify and assemble all necessary tools and components.